Supplier Guidance
Need a U.S. material match for CC333G?
CC333G is an EN nickel aluminum bronze designation. For U.S. sourcing, review C95500-style nickel aluminum bronze before considering other aluminum bronze grades.
Use this page to start the sourcing conversation, then send the drawing, dimensions, quantity, and operating conditions so the final material can be checked before production.
Equivalent at a Glance
Engineering Check
Material Data to Review Before Quoting
This table gives your engineering, purchasing, or quality team a fast way to compare the source callout with the U.S. material starting point. It supports RFQ review; it does not replace the approved drawing or material specification.
| Item to compare | CC333G | C95500 |
|---|---|---|
| Aluminum (Al) | 9.0-10.0% | 10.0-11.5% |
| Iron (Fe) | 4.0-5.0% | 3.0-5.0% |
| Nickel (Ni) | 4.5-5.8% | 3.0-5.5% |
| Manganese (Mn) | 1.5% max. | 3.5% max. |
| Practical conclusion | EN CuAl10Fe5Ni5-C nickel aluminum bronze | Closer to C95500 / C95820 family than C95400 |
Ranges checked against public CC333G / CuAl10Fe5Ni5-C references and C95500 composition data.
Where This Cross-Reference Helps
This cross-reference is useful for high-load bushings, wear plates, gears, marine components, and heavy-duty machined bronze parts.
If your print uses CC333G, include the full drawing, tolerances, quantity, required supply form, and inspection notes with the RFQ. That lets us quote the material and manufacturing route with fewer back-and-forth questions.
Related Specifications You May See
The same material family may also appear under these names or standards: CuAl10Ni5Fe4, CC333G, ZCuAl10Fe3Ni5, CAC704, CuAl10Fe5Ni5, DIN 1714 CuAl10Ni.
If one of these appears on your drawing or purchase record, include it with the RFQ. It helps us understand the original specification and avoid quoting a material that only looks similar on paper.
Before You Substitute the Material
Do not treat CC333G as an automatic replacement. Nickel, iron, manganese, seawater exposure, and mechanical property requirements control the final choice.
Cross-reference charts are helpful for purchasing and maintenance teams, but they do not replace a formal material specification, mill certificate, or customer-approved drawing.
Available Forms
Common supply forms for C95500
Once the material match looks right, the next question is usually shape and machining route. Precision Bronze can quote C95500 as standard stock or finished parts depending on the drawing, size, tolerance, and quantity.
Bronze Solid Bar Bronze solid round bar and rod stock for machining bushings, bearings, pins, spacers, gears, and custom bronze parts. 
Bronze Cored Bar Bronze cored bar and hollow bar stock for efficient machining of sleeve bushings, bearings, rings, and bronze components. 
Bronze Wear Plates Bronze wear plates, guide strips, and graphite plugged wear plates for sliding surfaces, tooling, and heavy equipment. 
Plain Bronze Sleeve Bushings Plain bronze sleeve bushings and cast bronze sleeve bearings in C93200 SAE 660 and alternative alloys for radial load applications. 
Custom CNC Bronze Parts Custom CNC machined bronze components, bushings, lead screw nuts, wear parts, and replacement parts made from drawings or samples.