Supplier Guidance
Need a U.S. material match for CuAl10Ni?
If a legacy DIN drawing calls for CuAl10Ni, C95500 nickel aluminum bronze is the U.S. material family to review for high-strength bronze parts.
Use this page to start the sourcing conversation, then send the drawing, dimensions, quantity, and operating conditions so the final material can be checked before production.
Equivalent at a Glance
Engineering Check
Material Data to Review Before Quoting
This table gives your engineering, purchasing, or quality team a fast way to compare the source callout with the U.S. material starting point. It supports RFQ review; it does not replace the approved drawing or material specification.
| Item to compare | CuAl10Ni | C95500 |
|---|---|---|
| Aluminum (Al) | 8.5-11.0% | 10.0-11.5% |
| Iron (Fe) | 3.5-5.5% | 3.0-5.0% |
| Nickel (Ni) | 4.0-6.5% | 3.0-5.5% |
| Manganese (Mn) | 3.0% max. | 3.5% max. |
| Practical conclusion | Legacy nickel aluminum bronze chemistry | Functional C95500 nickel aluminum bronze match |
Ranges checked against public DIN 1714 CuAl10Ni references and C95500 composition data.
Where This Cross-Reference Helps
This cross-reference is useful for heavy-load bushings, gears, wear parts, marine hardware, and components that need strength plus corrosion resistance.
If your print uses CuAl10Ni, include the full drawing, tolerances, quantity, required supply form, and inspection notes with the RFQ. That lets us quote the material and manufacturing route with fewer back-and-forth questions.
Related Specifications You May See
The same material family may also appear under these names or standards: CuAl10Ni5Fe4, CC333G, ZCuAl10Fe3Ni5, CAC704, CuAl10Fe5Ni5, DIN 1714 CuAl10Ni.
If one of these appears on your drawing or purchase record, include it with the RFQ. It helps us understand the original specification and avoid quoting a material that only looks similar on paper.
Before You Substitute the Material
Nickel, iron, aluminum, manganese, heat treatment, and casting process can change performance, so the final choice must follow the drawing.
Cross-reference charts are helpful for purchasing and maintenance teams, but they do not replace a formal material specification, mill certificate, or customer-approved drawing.
Available Forms
Common supply forms for C95500
Once the material match looks right, the next question is usually shape and machining route. Precision Bronze can quote C95500 as standard stock or finished parts depending on the drawing, size, tolerance, and quantity.
Bronze Solid Bar Bronze solid round bar and rod stock for machining bushings, bearings, pins, spacers, gears, and custom bronze parts. 
Bronze Cored Bar Bronze cored bar and hollow bar stock for efficient machining of sleeve bushings, bearings, rings, and bronze components. 
Bronze Wear Plates Bronze wear plates, guide strips, and graphite plugged wear plates for sliding surfaces, tooling, and heavy equipment. 
Plain Bronze Sleeve Bushings Plain bronze sleeve bushings and cast bronze sleeve bearings in C93200 SAE 660 and alternative alloys for radial load applications. 
Custom CNC Bronze Parts Custom CNC machined bronze components, bushings, lead screw nuts, wear parts, and replacement parts made from drawings or samples.